Filter
Top Products
Accounts Page (Passwords and Clock Management)
To access the accounts page (see figure 46), click the Accounts tab on the
device list page. The accounts page consists of the passwords panel, the clock management
panel, and the controller licensing panel.
Figure 46. Accounts Page
Passwords Panel
The VN-Matrix 325 system has three user accounts, all shown and changeable on the
passwords panel (see figure 47):
• Administrator — Allows full read/write access to all setup parameters.
• Public Account — Allows read only access to setup parameters.
• Recorder GUI Account — Allows full read and write access to all setup parameters for
the VNM Recorder.
NOTE: The VNM Recorder is not documented in this guide. Inclusion in this list is
for completeness and reference only.
1
2
3
Figure 47. Passwords Panel
Change a password as follows:
1. Enter the existing password in the Current Password field for the account that you
want to change (
a
on figure 47).
2. Enter the new password in both the New Password and Confirm fields for the account
that you want to change (
b
).
NOTES: • The password can include letters, numbers, and the underscore character.
The password is case-sensitive.
• As shipped from the factory, the password for both user names is the
same as the name itself (the password is “admin” for the admin user
name and “public” for the public user name).
3. Click the Update Password button to save the change (
c
).
The new password is required the next time you login.
VN-Matrix 325 Serial Digital Over IP CODEC • Operation 57