Filter
Top Products
Figure 30. FEC Encoder Streams Panel
NOTE: This setting does NOT track the same setting applied in other (video, anc,
colfec, and rowfec) encoder configuration pages. For most applications, you
should set the same transport for all stream elements, but this is not mandatory.
The
New Export Stream function is not supported.
Bandwidth Management Page and Typical Bit Rates
To access the bandwidth management page (see figure 31), click the
Bandwidth tab on the video encoder configure page.
1
2
Figure 31. Bandwidth Management Page
The bandwidth page provides for the control of the spatial and temporal compression
settings for the encoded source.
The available controls consist of two main panels:
a
Bandwidth Management (standard) controls — Provides a simple interface that
configures a subset of the VN-Matrix 325 compression toolset (see “Bandwidth
management standard controls panel“).
b
Advanced controls — Provides control of the complete VN-Matrix 325 compression
toolset (see “Advanced controls panel“). To hide this panel click the Standard
button in the Bandwidth Management panel.
NOTE: When you hide the Advanced control panel, default settings are applied to
some of the controls. These settings remain in force while the Standard panel
controls are in use and cancel any changes that were made previously.
VN-Matrix 325 Serial Digital Over IP CODEC • Operation 42