Filter
Top Products
Device List Page
Device Field
This field identifies the video format of the devices that are present on the network:
• 3G — A device that operates at all resolutions up to and including the 3G-SDI standard.
• HDSDI — A device that is operates at all resolutions up to and including the HD-SDI
standard.
• SDI — A device that operates at resolutions up to the SDI standard.
NOTE: All VNC 325 codecs are 3G.
Device Mode
The Mode column on the Device List tab shows how each VNC 325 unit is configured using
the following icons:
= Encoder
= Decoder
= VNM Recorder = Undefined
NOTES: • The VNM Recorder is not documented in this guide. Inclusion in this list is for
reference only.
• Only devices that are or have been configured to connect to the system
controller (using the procedure detailed in “Configuring Network Settings“)
are listed.
• The device list may show more devices than are in your system. This is because
the controller maintains a list of devices that have been used in the past and
are not currently available. In this case, the IP address entry for that device is
blank.
Removing a device from the network
Devices that have been physically removed from the system can be removed from this listing
as follows:
1. Click the Delete icon ( ) for the device to be removed (see figure 24). A confirmation
dialog box appears.
1
2
Figure 24. Removing a Device from the Network
2. Click OK in the confirmation dialog box.
VN-Matrix 325 Serial Digital Over IP CODEC • Operation 33