Filter
Top Products
DXP DVI Pro and DXP HDMI Series • Operation 20
3. Press and release the Input 5 button.
1 2 3 4 6 7 8
Press and release the Input 5 button.
The button lights amber.
INPUTS
5
Figure 14. Select Input 5
4. Press and release the Output 3, Output 4, and Output 8 buttons.
1 2 5 6 7
PRESET
ESCVIEW
CONTROL
Press and release the Output 3, Output 4, and Output 8 buttons.
The buttons blink amber to indicate that the selected input will be
tied to these outputs.
The Enter button blinks
green to indicate the need to
confirm the change.
OUTPUTS
ENTER
3 4
8
Figure 15. Select the Outputs
NOTE: You can cancel the entire set of ties at this point by pressing and releasing
the Esc
>
button. The Esc
>
button flashes red once.
5. Press and release the Enter button.
ENTER
All input and output buttons
become unlit or return to
background illumination.
Press the Enter button to
confirm the configuration
change.
The Enter button
becomes unlit or returns to
background illumination.
Figure 16. Press Enter to Confirm the Tie
The configuration now is input 5 video and audio tied to output 3, output 4, and
output 8.
Figure 17. Example 1, Final Configuration