Filter
Top Products
2-5
MVX 128 A VGA Matrix Switchers • Installation
PRELIMINARY
Reset button
f
Reset button — The Reset button initiates two levels of reset to the matrix
switcher. Press and hold the button while the switcher is running or
while you power up the switcher for different reset levels.
See Reset button in chapter 3, Operation, for details.
• Rear panel (mode 5) system reset — Press and hold the Reset button
until the Reset LED blinks three times (approximately 9 seconds) then
release the button and push it again to clear all ties and presets, and reset
all audio gains to 0 dB.
• Hard reset — Press and hold the Reset button while powering up the
switcher to perform all of the mode 5 reset functions and restore the
switcher to the default factory conditions.
Power connection
g
AC power connector — Plug a standard IEC power cord into this connector to
connect the switcher to a 100 VAC to 240 VAC, 50 or 60 Hz power source.
RESET