Filter
Top Products
3-23
MVX 128 A VGA Matrix Switchers • Operation
PRELIMINARY
Example 7: Recalling a preset
The following steps show an example in which a preset is recalled to become the
current confi guration. The steps show the front panel indications that result from
your actions.
1. Press and release the Esc button (fi gure 3-37).
ENTER PRESET VIEW ESC
CONTROL
Press the Esc button to clear all selections.
The LED blinks once.
= Blink once
1
1
Figure 3-37 — Clear all selections
2. Press and release the Preset button (fi gure 3-38).
PRESET
1 2 3 4
Preset 13 Preset 14 Preset 16Preset 15
Press and release the Preset button.
The Preset LED lights.
All input and output LEDs
with assigned presets light.
Lit
(Preset Assigned)
Unlit
(Preset Unassigned)
Figure 3-38 — Enter Recall Preset mode
3. Press and release the Output 1 button (fi gure 3-39).
ENTER PRESET VIEW
CONTROL
1 2 3 4
1 2 3 4
The Enter LED blinks to indicate
the need to recall the preset.
The Preset LED remains lit.
Press and release the Output 1 button.
The LED blinks to indicate that this preset
number is selected but not recalled.
= Blinking LED
Preset 13 Preset 14 Preset 16Preset 15
Figure 3-39 — Select the preset