Filter
Top Products
Operation, cont’d
MVX 128 A VGA Matrix Switchers • Operation
3-16
PRELIMINARY
3. To select both video and audio for viewing, if necessary, press and release the
RGBHV button and the Audio button (fi gure 3-22).
RGBHV AUDIO
I/O
1 2 3 4 5
OUTPUTS
6
7 8
Until you select an input, the buttons for all untied outputs light.
Press the Audio button
to toggle on and off.
The LED lights or
blinks when selected.
In this example, the Audio LED blinks to indicate audio breakaway
(assuming you have performed example 1, 2, and 3).
Press the RGBHV button
to toggle on and off.
The LED lights when
selected.
Figure 3-22 — Select RGBHV or video and audio
4. Press and release the Input 5 button (fi gure 3-23).
3 4 5 6 7
2 3 4 5
OUTPUTS
6
7 8
The output buttons for outputs that are not tied to input 5 are unlit.
The output buttons for outputs that are tied to input 5 light.
Press and release the Input 5 button.
The LED lights.
Figure 3-23 — Select an input
N
You can also view a set of ties by selecting a tied output. To demonstrate this,
note the number of a lit output LED, and then press and release the output
button for an untied (unlit) output. Observe that all of the untied outputs’
LEDs light. Then press the output button that you noted previously and observe
that the selected output LED, the tied input LED (input 5), and the output
LEDs light for all of the outputs that are tied to the input.