Filter
Top Products
Matrix Software, cont’d
MVX 128 A VGA Matrix Switchers • Matrix Software
5-8
PRELIMINARY
Tools menu
Assign device icons — Displays the complete set of input
and output device icons. You can drag any of these
icons to the input and output boxes.
Edit device palette — Allows you to add your own device
icon graphics.
Audio-Input gain settings — Displays the audio gain
level setting for a single input or for all inputs and
allows you to change it. The level is expressed as
the magnitude (number of decibels) and polarity
(positive, gain or negative, attenuation) of the audio
adjustment.
Audio-Output volume settings — Displays the audio
output level setting for a single input or for all inputs and allows you to
change it. The level is expressed as a percentage of the input audio volume
that is applied to the output; 0% is full attenuation (audio is silent), 100% is
full volume.
Mute-Outputs settings — Displays the Mute Adjust screen, from which you can
mute video and/or audio for each input.
Update fi rmware — Allows you to replace the fi rmware that is coded on the
switcher’s control board without taking the switcher out of service, opening
the switcher enclosure, and replacing the fi rmware chip set. See Updating
fi rmware on page 5-5.
Hardware status — Provides an overall view of the status of the matrix switcher,
including the power supply voltages, the temperature status, the Remote
RS-232/RS-422 port confi guration, and the installed and updated fi rmware
status (fi gure 5-6).
Figure 5-6 — Status window