Filter
Top Products
Operation, cont’d
MVX 128 A VGA Matrix Switchers • Operation
3-20
PRELIMINARY
5. Press and hold the Output 3 button and the Output 4 button (fi gure 3-30)
for approximately 2 seconds until the LEDs light steadily. The output 3 and
output 4 video and audio signals are unmuted.
3 4 5
OUTPUTS
3 4 5
OUTPUTS
The LEDs stop blinking and light to indicate that the
RGBHV and audio outputs are unmuted.
Release the button.
Press and hold the Output 3
and Output 4 button.
2 seconds
= Blinking LED
Figure 3-30 — Unmute the outputs
N
If both RGBHV and audio are selected, the unmute action toggles both the video
and audio outputs. If either the video output or the audio output is already
unmuted, the muted output is unmuted and the unmuted output is muted.
6. Press and release the View button to exit View-Only mode (fi gure 3-31).
SET
VIEW
CONTROL
Press the View button
to exit View-Only mode.
The View LED returns
to the unlit state.
All input LEDs and output
LEDs return to the unlit state.
Figure 3-31 — Press the View button to exit View-Only mode