Filter
Top Products
PVS 305SA Switcher • Software Configuration
5-4
3. Follow any on-screen instructions, which vary depending on the start option
selected.
N
After selecting any of the above options, and at any time the Global Configurator
is running, press F1 or click on Help > Contents to access the Global
Configurator help file and follow the step-by-step instructions to configure an
attached IP device.
If “Create a New Project” is selected, enter the IP address of the attached
device and click OK. From the next window select the IP Link device type that is
connected and click OK. Another window opens with an emulation of the front
panel layout of the device.
If “Open an Existing Project” is selected, in the new window browse to the folder
where the GC3 project file (*.gcz) is saved, select the file and click Open. The file is
uploaded and opened in the Global Configurator window.