Filter
Top Products
Getting Acquainted with the Control Panel
E-8 User’s Manual
plays the offset from a particular line in the range
(–128 to +127).
The example here indicates an offset of +8/180
inch from the currently selected print line.
Tearing off continuous forms
To tear off continuous forms:
1. Make sure the printer has stopped printing. Press
NEXT DISPLAY repeatedly until the menu
shown at the left appears.
2. Press F2 to advance the forms to the tear-off edge.
The control panel displays the prompt message
shown at the left.
3. Tear off the continuous forms.
4. Press any button on the control panel to retract
the continuous forms back to the original posi-
tion. The original basic menu reappears.
Resetting the printer
To reset the printer:
1. Press NEXT DISPLAY repeatedly until the menu
shown at the left appears.
2. Press F1. The confirmation message shown at the
left appears.
3. Respond to the confirmation message. Press F3 to
reset the printer. If you do not want to reset the
printer, press F1.
After the printer is reset, the original basic menu
reappears.
Form ↑
feed
Tear off
paper
Line ↑
feed
Tear off paper
and press any button
Form ↑
feed
Tear off
paper
Line ↑
feed
Reset
printer
Micro ↑
feed
Line ↑
feed
No Yes
RESET: Are you sure?
Now resetting
Form ↑
feed
Tear off
paper
Line ↑
feed
#E_AppendixE Page 8 Wednesday, September 2, 1998 10:05 AM