Filter
Top Products
Printing on Cut Sheets
4-10 User’s Manual
You can print on cut sheets without removing continuous forms from
the tractor section.
1. Press the PAPER PATH button on the control panel to select
FRICTION (friction feed). The FRICTION lamp lights.
Important:
1. Retract continuous forms, if any, from the paper path to the tractor
section. The FRICTION lamp lights.
2. If the lamp does not light to indicate FRICTION, continuous
forms remain in the paper path. Cut the continuous forms and
select FRICTION again.
Printing on Cut
Sheets
Continuous forms
DL6400/6600 Book Page 10 Friday, July 31, 1998 11:42 AM