Fujitsu DL6400 Printer User Manual


 
Chapter Organization
8-2 User’s Manual
If you are using setup mode for the first time, read “Activating Setup
Mode” on page 8-2 and “Using Setup Mode” on page 8-4 to learn how
setup mode works. Once you understand the basics, read the following
sections to learn how to select printer options compatible with your
processor hardware and software.
To restore printer default values set at shipment, see “Resetting Default
Values” on page 8-36.
For information on using SELF-TST, HEX-DUMP, and V-ALMNT,
see “Using Diagnostic Functions” on page 8-37.
Experienced users can turn to the flowchart at the end of this chapter,
which lists the printer setup functions and options for quick reference.
Before entering setup mode, load continuous forms paper. For
information, see “Loading Continuous Forms (Front)” on page 4-1.
You will need approximately eight sheets of paper to print all setup
selections.
Enter setup mode as follows:
1. Check that forms are loaded.
2. Press ONLINE to place the printer offline.
3. Press FONT and MENU together until the printer beeps.
If a beep does not sound, you are not in setup mode. Place the
printer offline and try again.
Upon entering offline setup mode, the printer prints the
information shown in Figure 8-1.
Chapter
Organization
Activating
Setup Mode
DL6400/6600 Book Page 2 Friday, July 31, 1998 11:42 AM