Filter
Top Products
Cut Sheets
7-8 User’s Manual
For cut sheets, use high-quality paper with a light reflection factor of
60 percent or more. Ordinary high-quality white paper has a light
reflection factor of approximately 70 percent. The darker or thinner
the paper, the lower the reflection factor.
1. Size
Width: 90 to 420 mm (3.5 in to A3 horizontal)
Length: 90 to 420 mm (3.5 in to A3 horizontal)
2. Number of parts
The printer can handle multipart paper. Table 7-3 lists allowable
combinations for the total number of parts, including the original,
and the ream weight.
Table 7–3 Number of parts and ream weight for cut sheets
Type Number
of parts
Ream weight in g/cm
2
Front Rear
*1
*1 For DL6600 only.
Single
part
1 <35>, 46, 52, 64, 81
⅜
35, 46, 52, 64, 81, 104,
127
⅜
Pressure
sensi-
tive
*2
*2 Ream weights for pressure-sensitive and carbon-backed multipart
forms may differ slightly according to the manufacturer. Select forms
of the closest weight to those in the table.
2
3
4
5
[6]
[7]
[8]
39, 50, 64, (81)
39, 50, (64, 81)
39, (50, 64, 81)
39, (50, 64)
39, (50, 64)
39, (50, 64)
39, (50, 64)
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
Carbon-
backed
multi-
part
*3
*3 Do not use carbon paper with cut sheets.
2
3
4
5
[6]
[7]
[8]
39, 52, 64, (81)
39, 52, (64, 81)
39, (52, 64, 81)
39, (52, 64)
39, (52, 64)
39, (52, 64)
39, (52, 64)
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
⅜
Cut Sheets
#07_Chapter07 Page 8 Friday, July 31, 1998 1:11 PM