Filter
Top Products
Messages
E-24 User’s Manual
Internal test The printer is performing its
internal hardware test. This message
appears for 2 seconds immediately
after the printer is turned on.
Line count = xxx This message appears briefly when a
line feed is executed. It indicates the
new line position for printing,
where line 001 is the top-of-form
position.
Loading/Unloading paper The printer is loading paper to the
print position or unloading paper
to the tractor.
NOTE: Values are lost if
power is turned off.
This message appears when you exit
setup mode by selecting USE,
which temporarily save the changes
you made. When you turn the
printer off, the changes are lost.
NOTE: Values have been
permanently saved.
This message appears when you exit
setup mode by selecting SAVE,
which permanently saves the
changes you made, making them
the printer's new power-on default
settings.
Now resetting The printer is clearing its print
buffer and resetting itself for
printing.
Offline setup mode This message appears briefly when
you enter setup mode using the
control panel. It is the opening
message of offline setup mode.
Offset (n/180”) = xxxx This message briefly appears when a
micro line feed is executed. It
indicates the offset from the current
print line in units of 1/180 inch,
where xxxx is –128 to +127.
Table E–2 Printer status messages (Continued)
Message Meaning
#E_AppendixE Page 24 Wednesday, September 2, 1998 10:05 AM