Filter
Top Products
Continuous Forms
User’s Manual 7-3
PAPER
SPECIFICATIONS
3. Characteristics of paper with the number of parts in brackets [ ]
may differ slightly with the manufacturer and should be tested
carefully before use.
4. Paper used for continuous forms differs depending on whether it is
loaded from the front or from the back of the printer. The paper
specifications in Table 7-1 are for forms loaded from the front.
5. The total thickness of multipart paper must not exceed 0.65 mm
(0.025 in).
3. Binding
Select a binding type from Table 7-2.
Table 7–2 Binding for continuous forms with two to six parts
Binding Remarks
Double-sided glued multipart
forms (zigzag spot gluing)
Recommended because:
• Forms remain flexible.
• Parts do not separate or
become misaligned easily.
Double-sided paper staples The more parts, the easier the
parts separate or become
misaligned.
25.4 mm (1 in) or less
76.2 mm (3 in) or less
DL6400/6600 Book Page 3 Friday, July 31, 1998 11:42 AM