Filter
Top Products
Messages
E-26 User’s Manual
Tear off paper and press any
button
This message appears when Tear off
paper is selected from the control
panel. After tearing off the
continuous forms, press any button
on the control panel to retract the
paper to the top-of-form.
TOP ADJ: xx/6 IN + xx/180
MICRO↑ EXIT SAVE
This message appears for 7 seconds
when the printer loads paper while
offline. It indicates the top-of-form
(line 001) position from the top
edge of the paper by the sum of a
multiple of 1/6 inch and a multiple
of 1/180 inch. You can adjust the
top-of-form by using ↓↑ and F1
while this message is displayed.
Press F2 to save the setting
temporary. Press F3 to save the
setting permanently.
Vertical alignment: xx
SPEED INCR DECR
The printer is printing the vertical
bar pattern used to check alignment
between forward and backward
printing. Press F1 to change print
quality (speed). Press F2
(increment) and F3 (decrement) to
adjust the alignment of forward
printing. To stop printing, press the
ONLINE or NEXT DISPLAY
button.
Table E–2 Printer status messages (Continued)
Message Meaning
#E_AppendixE Page 26 Wednesday, September 2, 1998 10:05 AM