Filter
Top Products
Chapter 6 RAID Group Management
6.2 Functions in the Action Area for RAID Group
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
176
• Number of RAID Group
Input the number of RAID groups that is to be created.
When creating multiple RAID groups at a time, the new RAID groups are named automatically. Refer
to "Naming conventions for creating volumes" (page 993)
for details.
• Disk Type
Select the type of drive that configures a RAID group from the list box.
- Online
- Nearline
- SSD
- SED
• RAID Type
Select the type of RAID group that is to be created from the list box.
- High Performance (RAID1+0)
- High Capacity (RAID5)
- High Reliability (RAID6)
- Reliability (RAID5+0)
- Mirroring (RAID1)
- Striping (RAID0)
• RAID Group Capacity
Input the RAID group capacity that is to be created and select the units of capacity.
A RAID group is automatically created with a capacity of the entered value or higher.
The following input conditions apply:
- Numeric characters
- TB/GB/MB
→ A confirmation screen appears.
An error screen appears in the following conditions:
• When the "Name" overlaps with an existing RAID group name
• When the "Name" does not satisfy the input conditions
• When the RAID group that is specified using the automatic setting cannot be created with the
drives that are installed in the ETERNUS DX Disk storage system