Filter
Top Products
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
909
The procedure to start Storage Migration is as follows:
Procedure
1 Click [Start] in [Action].
2 Click the [Browse...] button to select a Storage Migration setting file, and click the [Next >>]
button.
• Storage migration setting file
Input the location where the Storage Migration setting file is stored.
Click the [Browse...] button to specify the location, or input the location directly.
There are two types of template files for Storage Migration setting; new format (*1) template files
and old format (*1) template files. Storage Migration setting files in both formats can be used
when the controller firmware version is V10L30 or later.
*1: A template file in the new format can be downloaded when the controller firmware version is V10L30 or
later. A template file in the old format can be downloaded when the controller firmware version is older
than V10L30. Refer to "11.2.11.2 Download Template File for Storage Migration Settings" (page 912)
for
details.