Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
607
4 Click the [Done] button to return to the [FC/FCoE Host QoS] screen.
End of procedure
9.2.7.7 Set iSCSI Host QoS
This function configures the bandwidth limit (the maximum performance limit) of the iSCSI host.
The procedure to set the iSCSI host QoS is as follows:
Procedure
1 Select the iSCSI host to set the bandwidth limit (multiple selections can be made), and click
[Set iSCSI Host QoS] in [Action].
This function can be used, irrespective of whether the Host-LU QoS has been enabled or disabled. However, if
the Host-LU QoS has been disabled, the host starts operating within the configured bandwidth limit after the
Host-LU QoS is enabled.
• Configure the port bandwidth limit on each port. Refer to the following sections for details:
- "9.2.7.9 Set FC Port QoS" (page 610)
- "9.2.7.10 Set iSCSI Port QoS" (page 611)
- "9.2.7.11 Set SAS Port QoS" (page 613)
- "9.2.7.12 Set FCoE Port QoS" (page 614)
• The LUN bandwidth limit can be configured in the LU QoS group. Refer to "9.2.7.2 Set Host-LU QoS" (page
599) for details.