Filter
Top Products
CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
5.1 Consumable and replacement cycle
5.2 Replacing the brake roller
5.3 Replacing the pick roller set
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
5.3 Replacing the pick roller set
1. Open the ADF while pushing the ADF button.
2. Remove the ADF paper chute from the scanner.
3. Open the pick roller cover. Remove the rollers from the shafts.
4. Install the new pick rollers aligning their grooves to the shafts.
5. Close the pick roller cover.
6. Attach the ADF paper chute.
7. Push in the center of the ADF to close it until the ADF button is locked.
8. Reset the Pick Roller counter. For details on resetting, refer to "7.6 Resetting the consumable counters".
CAUTION
Be careful not to pinch your fingers with the ADF cover. -Do not close the ADF cover when the pick roller cover is opened.
ATTENTION
Confirm that rollers of the pick roller set are firmly installed. If not, they may cause feeding errors such as document jams.
All Rights Reserved, Copyright (C) PFU LIMITED 2004