Filter
Top Products
CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Loading documents onto the ADF
2.3 Scanning documents
2.4 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
2.2 Loading documents onto the ADF (Continued from the previous page)
5. Adjust the stacker extension according to the document size and raise the stopper.
6. Adjust the stacker level.
The level of the stacker can be changed according to the type and amount of paper. Place the stacker on the lower level in a slant
position for paper of regular thickness. However, lightweight or thin paper or for paper that is slightly curled, bring the stacker to its
upper horizontal position.
Lower position (Regular paper)
Upper position (Thin paper)
ATTENTION
When the stacker is mounted on the upper position, the stacking capacity decreases (Around 100 sheets at 80g/m
2
(21lb)).
1 | 2 | 3 | 4 | 5 | 6
All Rights Reserved, Copyright (C) PFU LIMITED 2004