Filter
Top Products
CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
1.1 Names and functions of parts
1.2 Functions of the operator panel
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
1.1 Names and functions of parts (Continued from the previous page)
No. Name Function
10 SCSI interface connector Used for connecting a SCSI interface cable from a PC.
11 SCSI ID switch Used for setting SCSI ID (The setting at the factory shipment is ID=5).
12 USB interface connector Used for connecting a USB interface cable from a PC.
13 Power inlet Used for connecting a power cable from the power outlet..
14 Power switch Used for turning ON/OFF the scanner.
15 Third Party Slot (Optional Slot) The slot for an option board.
16 EXT connector Connector port for optional units.
1 | 2 | 3
All Rights Reserved, Copyright (C) PFU LIMITED 2004