Filter
Top Products
CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
9.1 Extended memory board
10 SCANNER SPECIFICATIONS
Appendix
9.1 Extended memory board
The scanning performance is optimized at higher resolution settings by installing additional memory boards. Additionally, with added memory
boards, scanning both sided color sheets at 401 dpi or at higher resolutions will not be suspended or interrupted.
1. Remove the screws on the rear side of the scanner, and remove the covers.
2. Insert the memory boards into the slots and push it down so that the boards are fixed in by the claws.
3. Secure the screws to fix the covers.
The following memory boards are recommendable for using with fi-5650C Color Image Scanner.
Manufacturer Model Memory Size
Micron Technology MT4LSDT1664HG-13E 128MB
Micron Technology MT8LSDT3264HG-13E 256MB
ATTENTION
Install 2 memory boards whose specifications must be equal, otherwise this option might not operate correctly.
HINT
To confirm the instalation of the extended memory board, check the scanner memory value of [standard information] on [Device information]
panel in [Software operation panel].
All Rights Reserved, Copyright (C) PFU LIMITED 2004