Filter
Top Products
CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
6.1 Removing jammed documents
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Symptom : Pickup errors occur frequently.
Back to the trouble shooting index
Do the documents satisfy the conditions described in "8.2
Document Quality"?
NO
Use documents that satisfy the requirements.
YES
Were the documents fanned before loaded onto the ADF paper
chute?
NO
Fan the documents before loading, or reduce the number of
sheets of the documents.
YES
Are all the consumables (Pick roller set, Brake roller) installed
correctly?
NO
Correctly install the consumable(Pick roller set, Brake roller), if
needed.
YES
Is any of consumables (Pick roller set, Brake roller) dirty?
YES
Clean the dirty consumable.
NO
Is any of consumables (Pick roller set, Brake roller) worn out?
Check the consumable counter.
YES
Replace the consumable, if needed. Refer to "Replacing
Consumables" for details on the consumable counter.
NO
If you cannot solve the problem after taking measures, check the
items in "6.3 Items to check before contacting the dealer where
you bought the scanner" and contact the dealer or an authorized
FUJITSU service provider.
All Rights Reserved, Copyright (C) PFU LIMITED 2004