Filter
Top Products
MAN607-S
28-03-2003 Page 4-20 of 53
4.8 Printer commands
I/F-COM simple command set is default command set however optional
command set can be downloaded. See appendix for additional information.
4.9 I/F-COM simple command set.
The following commands are use when communicating with the printer
controller. All other commands is ignored
4.9.1 Small Font
[Name] Small Font (8x12)
[Format] ASCII NUL
Hex 00
Decimal 0
[Description] Chooses small font from the current print position.
4.9.2 Low Font
[Name] Low Font (16x12)
[Format] ASCII SOH
Hex 01
Decimal 1
[Description] Chooses low font from the current print position.
4.9.3 Narrow Font
[Name] Narrow Font (8x28)
[Format] ASCII STX
Hex 02
Decimal 2
[Description] Chooses narrow font from the current print position.
4.9.4 Normal Font
[Name] Normal Font (16x28)
[Format] ASCII ETX
Hex 03
Decimal 3
[Description] Chooses normal font from the current print position. This is
the default font after power up or reset.