Filter
Top Products
MAN607-S
28-03-2003 Page 7-43 of 53
DC3+ ‘ + ’ Ruler Line ON
DC3+ ‘ - ’ Ruler Line OFF
DC3+ ‘ P ’
Print One Dot Line after Printing Line
Buffer Data
DC3+ ‘ C ’ Ruler Line Buffer Clear
DC3+ ‘ (’
Continuous Ruler Line Control Code
Input
7.2 Fujitsu compatible command set
7.2.1 Escape sequences, overview.
HT Horizontal tab
LF Line feed with printing
FF Forms feed
ESC RS: Black-white reversed printing specification
ESC US: Black-white reversed printing cancellation
ESC !+n: Printing mode specification
ESC %+n:
Download character set
specification/cancellation (valid only when
optional memory is installed)
ESC &+y+c1+c2+x+[d]k :
Download character definition (valid only
when optional memory is installed)
ESC *+m+n1+n2+[d]k : Bit image mode specification
ESC ?+n
External registration character deletion (valid
only when optional memory is
ESC 2 1/6-inch line pitch setting
ESC 3+n Minimum-pitch-unit line pitch setting
ESC @ Printer initialisation
ESC A+n Line spacing setting
ESC C+n Page length (number of lines) setting
ESC D+[n]k+NUL Horizontal tab position setting
ESC J+n Printing and minimum-pitch-unit paper feed
ESC K+n Backward paper feed
ESC R+n International character specification
ESC c+1+n Internal processing setting
ESC d+n Printing and n-line feed
ESC e+n Printing and backward n-line feed
ESC s+n Printing speed setting
ESC t+n Character code table selection
ESC {+n Upside-down printing setting/cancellation
FS !+n Kanji printing mode collective specification
FS & Kanji printing mode specification
FS . Kanji printing mode cancellation