Filter
Top Products
MAN607-S
28-03-2003 Page 4-27 of 53
4.9.32 Save data to board
[Name] Save data to board
[Format] ASCII ESC e
Hex 1B 65
Decimal 27 101
[Description] This command saves all settings to flash.
4.9.33 Change dot size
[Name] Change dot size
[Format] ASCII ESC f n
Hex 1B 66 n
Decimal 27 102 n
[Description] If n = 0x01, then the board is set to
FTP607MCLXXX.
If n = 0x02 then is it set to LTP. The value is
saved to flash,
4.9.34 Change form feed length
[Name] Change form feed length
[Format] ASCII ESC g n
Hex 1B 67 n
Decimal 27 103 n
[Description] N represents the value in mm that is form feeded
after the feed command is sent. The value is
saved to flash.
4.9.35 Change baud rate
[Name] Change baud rate
[Format] ASCII ESC h n
Hex 1B 68 n
Decimal 27 104 n
[Description] N represents the new baud rate, legal values for
n = 1 to 255. The baud rate is calculated as
921600/n = new baud rate.
For instance 921600/8 = 115200baud.
The value is saved to the flash
4.9.36 Change form feed time
[Name] Change form feed time
[Format] ASCII ESC i n
Hex 1B 69 n
Decimal 27 105 n