Filter
Top Products
MAN607-S
28-03-2003 Page 7-44 of 53
FS 9+n Detection function enable/disable setting
FS C+n Kanji code system selection
FS W+n
Kanji double height and width mode
specification/cancellation
GS < Mark detection execution
GS A+m+n
After-mark-detection head detection
distance setting
GS E+n Print quality setting
GS V+n+m Paper cutting
GS e+n+m Bar code width setting
GS h+n Bar code height setting
GS k+m+n+[d]k Bar code printing
GS w+n Bar code width magnification setting
FS *+n1+n2+[n]k
High speed collective image printing
specified
GS &+m+x+y1+y2+[n]k Registration of image data
GS '+m+n Print registered image data
FS E+n Correction of impressed energy
ESC V+n Right rotation 90º
GS a+n
Setting and cancellation of status
transmission.
FS r+n Parameter transmission
ESC EM+n
Setting the amount of the feeding at
automatic paper feed
ESC X+n+m
Setting the turning time of the motor
excitation
7.3 Command list description
Each command is explained using the following conventions:
[Name] Command name
[Function] Function of command
[Code] Control code represented in hexadecimal or decimal
notation.
[X]
16
Hexadecimal notation
[X]
10
Decimal notation
[Explanation] Explanation of command function
7.3.1 Horizontal tab
[Name] Horizontal tab