Filter
Top Products
MAN607-S
28-03-2003 Page 6-39 of 53
The paper near end status, can be seen on the LED on the aux connector,
it can be reading through the status command, and if a driver is used, then
it can be reading in the port monitor: If paper jam is used, then will the
printer stop printing if this signal is going low, the value of this bit can be
seen on the LED on the aux output connector, it can be reading by a status
request, or if a driver is used, then it can be reading by the port monitor.
6.6.5 Power connector
Power connector CN6: 43045-0400
Pin 1 2 3 4
Function GND 24VDC GND 24VDC
6.6.6 USB connector
USB connector CN8: UBBR-04SW11
Pin 1 2 3 4
Function N.C. USB- USB+ GND
6.6.7 AUX connector
Output connector CN8: 53324-0510
Mating connector: TBA
Pin 1 2 3 4 5