Filter
Top Products
MAN607-S
28-03-2003 Page 2-7 of 53
1 SYSTEM DESCRIPTION
This reference manual describes the specifications, functions, and
operating procedures for the PRN607-S Interface Board.
The PRN607-S is an interface board for the FTP607MCLxxx series printer
mechanisms.
This reference manual also describes the print operation of the
FTP607MCLxxx. Read this reference manual thoroughly before using the
PRN607-S. PRN607-S is designed for the following Fujitsu printers:
FTP627MCLxxx
FTP637MCLxxx
PRN607-S consists of an interface board.
The communication is RS232, USB or IRDA.
PRN607-S can print graphic data either compressed or non-compressed.
Burn time can be set to control the printing intensity
Windows 95/98, 2000, NT and CE drivers are available at
http://www.if-com.com, for easy operation by PC. Linux drivers are available
upon request.
2 INSTALLATION
2.1 Unpacking
Remove the cover observing precautions for Electro Static Discharge
(ESD). Make sure that board is handled with care with respect to
Electrostatic environment.
2.2 Labels
PRN607-S has 3 labels;
Label 1 on backside ex. Ifxxxxxx is a unique ID number. For service and
question based upon 1 particular board please refer to this number.
Label 2 on topside ex. PRN607-S is part number. Please refer to this
number upon reordering. Make sure that software revision is applied at
same time.
Label 3 is an internal code. Please ignore.
2.3 Installation
PRN607-S is fastened in the product by 4 M3.3 screws. The cables (for the
thermal head, the stepper-motor and detector) are placed in the thermal
printer connector on the PCB. 1 Mounting hole is grounded. See drawing
for more details.