Filter
Top Products
MAN607-S
28-03-2003 Page 4-29 of 53
4.9.40 Bar code height setting.
[Name] Bar code height setting
[Format] ASCII ESC h n
Hex 1B 68 n
Decimal 27 104 n
[Range] 1<=n<=255
[Default] n=60
[Description] Parameter n specifies the height of a bar code in dots.
4.9.41 Bar code printing
[Name] Bar code printing
[Format] ASCII ESC k m n d1 to dn
Hex 1B 6B m n d1 to dn
Decimal 27 107 m n d1 to dn
[Description] Parameter m specifies the type of bar codes to be printed.
Parameter n specifies no of barcode characters.
m(dec) Type of
Barcode
Number of
barcode
characters
Value of d
65 UPCA 11<=n<=12 48<=d<=57
67 EAN13 12<=n<=13 48<=d<=57
68 EAN8 7<=n<=8 48<=d<=57
69 Code39 Variable Space , $ , % , * , + , - , . , / , 0-9 , A-
Z
72 Code128 Variable 0 to 105
UPCA: if n is 11 then the board calculate the checksum
EAN8: if n is 7 then the board calculate the checksum.
EAN13: if n is 12 then the board calculate the checksum
Code 39: The first and last character must be ‘*’. This is the
syntax for Code 39.
Code128. There is three subset of Code128 (Code128A,
Code128B and Code128C). The start character specifies
which character set to be used. The start character must be
either 103 (subset A), 104 (subset B), 105 (subset C).
The following table shows the value between data (d) and
barcode.