Filter
Top Products
MAN607-S
28-03-2003 Page 7-46 of 53
5. If line spacing during printing/line-feeding is shorter than the
character height, a length equal to the character height feeds the
paper.
7.3.3 Forms feed
[Name] Forms feed (new page)
[Function]
The FF command prints the data already contained in the print buffer, then
sets the next-data receive position at the leftmost column on the next page.
[Code] [0C]
16
[12]
10
[Explanation]
(1) The FF command feeds paper by the specified page length.
(2) In the initial state, the page length is set to approx. 143 mm. (44 lines).
(3) When cut-sheet printing is selected, the FF command executes the
following operations:
1. When the page length is set to 0 (page length cancellation) by using
2. ESC C, the paper is ejected.
3. Paper ejection is checked using the paper-out sensor. When the
detection is invalid, the paper ejection is checked.
4. The maximum paper ejection length is approx. 1m. If the paper-out
state is not detected within the span of the 1-meter ejection, the
paper ejection terminates.
5. When paper with mark is selected, the FF command executes the
following operations:
6. The data contained in the print buffer is printed, and a search is
made for the head of the next label.
7. The beginning of a line is set as the next printing position.
8. A paper with mark is selected with ESC c1.