Filter
Top Products
38 Options Guide RX200 S5
Installing a SATA DVD drive Accessible drive
© cognitas. Gesellschft für Technik-Dokumentation mbH 2009 Pfad: W:\Anwendungsdaten\FCT\tim_local\work\PICHOL\OBJ_DOKU-4104-001.fm
7.1 Installing a SATA DVD drive
Ê Open the server as described in chapter “Preparation” on page 19.
Ê First remove the dummy module by pushing it forward out of the housing.
V CAUTION!
Keep the dummy module for future use. If you remove the accessible
drive again and do not replace it with a new one, the dummy module must
be reinstalled to comply with EMC regulations and to satisfy cooling
requirements and fire protection measures.
Figure 16: Connecting the DVD cable
Ê Connect the free ends of the DVD cable to the corresponding connectors on
the HDD backplane (see arrow) or on the system board ("SATA ODD", see
also section “Cable diagrams” on page 68).