Filter
Top Products
RX200 S5 Options Guide 51
Expansion cards and iBBU Installing a modular RAID controller
9.2 Installing a modular RAID controller
A modular RAID controller can be installed in the server as an option. Riser card
holder #3 (see figure 25 on page 48) is intended solely for this purpose.
Removing riser card holder #3
Ê Lift riser card holder #3 from its slot.
Installing a RAID controller
Ê Please read the documentation supplied with the RAID controller.
Ê Connect any required cables onto the RAID controller.
Figure 28: Installing the RAID controller in riser card holder #3
Ê Carefully push the RAID controller into the slot of riser #3.
I Make sure that the RAID controller is positioned correctly (see circle).
Installing the riser card holder
Ê Position the riser card holder over the relevant slot on the system board.
Ê Carefully push the riser card holder into the slot by pressing on the green
points.