Filter
Top Products
Working with the notebook
A26391-K144-Z120-1-7619, edition 2 43
Connecting the notebook to the Port Replicator
!
It is not permissible to connect the notebook to the Port Replicator during operation.
i
When the notebook is connected to the Port Replicator, you should not connect the
power adapter to the notebook, but instead to the Port Replicator.
When the notebook is connected to the Port Replicator, the audio connections on the
notebook are deactivated: Line In socket, microphone jack and headphone port.
► Switch the notebook off.
► Unplug the power adapter from the mains outlet.
► Pull the power adapter cable out of the DC socket (DC IN) of the notebook.
2
3
4
a
1
► Make sure that the hoop (a) is in the position illustrated.
► Align the docking connectors as shown (1).
► Press down on the notebook’s rear corners so that it may lock into position.
► Connect the power adapter cable to the DC jack (DC IN) of the Port Replicator (2).
► Connect the power cable to the power adapter (3).
► Plug the power cable into the mains outlet (4).
i
If the notebook is connected to a Port Replicator, the operating system creates an
hardware profile for the "Docked" mode. In this profile, for example, the setting is saved
as to which monitor was last used for output. This profile will be loaded, as soon as the
notebook is connected to any desired Port Replicator.