Filter
Top Products
Energy saving functions
80 A26391-K144-Z120-1-7619, edition 2
i
You can configure the Suspend/Resume button under Start - Control Panel - Performance
and Maintenance - Power Options - Advanced.
In the Standby/Suspend-to-DRAM mode the content of your main memory is saved by continuing to
supply the main memory with power, while the processor, monitor, hard disk and other internal
components are switched off. This mode is activated whenever you press the Suspend/Resume
button. Saving is also triggered when you do not make an entry on your notebook for a certain time.
When you resume work, your notebook returns to the place at which you discontinued working.
i
If you use an integrated LAN/Modem, a PC-LAN card or a PC modem card, we do not
recommend switching over to the Standby mode, as this may lead to an interruption in the
network connection.
When you press the Suspend/Resume button for more than 4 seconds, your notebook will
switch off.
You can set the power-management features for your notebook under Start - Control Panel -
Performance and Maintenance - Power Options.
i
Additional information on this service programme is contained in your operating system
help files.