Filter
Top Products
Security functions
A26391-K144-Z120-1-7619, edition 2 53
An example:
Here the combination 2, 3 was selected in the
first line, the number 4 in the second line, the
combination 1, 3 and 4 in the third line, the
number 2 in the fourth line and finally the
combination 1, 2, 3 and 4 in the fifth line.
In this case the supervisor password is then:
2/3 4 1/3/4 2 1/2/3/4
Assigning the user password
The setup programme can be found under Start - AddOn.
► Double-click on the symbol to start the setup programme for FJSECU.EXE.
The programme starts.
or
► Enter the programme name FJSECU.EXE under Start - Run.
► Click on OK.
The programme starts.
The program instructions will help you configure the password. Enter the user password with its
numbers and number combinations in the same way as the supervisor password.
Using Security Panel
Entering security password
During the next reboot a key symbol
in the display field indicates that Security Panel is
activated. Your notebook does not start up until you have correctly entered your selected user
password.
For the example in the section "Assigning the supervisor password" (2/3 4 1/3/4 2 1/2/3/4), the
following steps are necessary:
► Simultaneously press the security keys 2 and 3.
► Press the security button 4.
► Simultaneously press the security keys 1, 3 and 4.
► Press the security button 2.
► Simultaneously press the security keys 1, 2, 3 and 4.
► Then press the Enter key to complete the entry.
Your notebook boots.
i
The Security Panel is never activated with the functions Wake on Ring, Wake on LAN and
Time Resume. This means the notebook boots without password entry with the functions
named.