Filter
Top Products
98
Chapter 6: Troubleshooting
www.gateway.com
Non-system disk or disk error
■ Eject the diskette, then press ENTER.
■ If the diskette is bootable, check it for errors with an error-checking
program.
■ For troubleshooting information, see “You need to troubleshoot an IDE
hard drive” on page 107.
Not enough memory
■ Close all programs that are not currently in use.
Required parameter missing
■ Make sure that you entered the right command.
■ If you are trying to exit DOS to return to Windows, type exit, then press
E
NTER.
Syntax error
■ Make sure that you entered the right command.
■ If you are trying to exit DOS to return to Windows, type exit, then press
E
NTER.
System Event Log Full
■ Clear the event log. To clear or view the event log, open the BIOS Setup
utility, select the
Advanced menu, then select the Event Log Control menu.
For information on opening the BIOS Setup utility, see “Opening the BIOS
Setup utility” on page 88.
Time and date not set
■ Open the BIOS Setup utility, then set the computer date and time.
Write-protect error
■ Your diskette is write-protected. Move the write-protection tab over the
window on the back of the diskette.