81
Replacing the system board
www.gateway.com
12 Lift the tray away from the case.
13 Insert the new system board tray into the case, then slide the tray toward
the back of the case.
14 Tighten the system board tray thumbscrew on the back of the case.
15 Reinstall the memory, processors, voltage regulators, and fans.
16 Connect the power, data, and fan cables by referring to the notes you took
in Step 8.
17 To reinstall the expansion cards, follow the instructions in “Installing PCI
expansion cards” on page 60.
18 Follow the instructions in “Closing the server case” on page 45.
19 Turn on your server.
20 Press F2 when the Gateway logo screen appears during startup. The BIOS
Setup utility opens.
21 Check BIOS settings to make sure that they detect the server’s new
hardware, then save your changes (if any) and close the BIOS Setup utility.