Filter
Top Products
86
Chapter 4: Installing Components
www.gateway.com
7 Push the battery retention clip away from the battery until the battery lifts
up. You can use a screwdriver to help lift the battery.
8 Remove the old battery.
9 Make sure that the positive (+) side of the new battery is facing up, then
press the new battery into the socket until it snaps into place.
10 Follow the instructions in “Closing the server case” on page 45.
11 Turn on the server.
12 Press F2 when the Gateway logo screen appears during startup. The BIOS
Setup utility opens.
13 Restore any BIOS settings that you wrote down in Step 3.
14 Save all your settings and close the BIOS Setup utility.