Filter
Top Products
91
Resetting the BIOS
www.gateway.com
8 Remove the jumper across pins 2-3 of jumper JP7, then place the jumper
across pins 1-2. The BIOS memory is cleared.
9 Place the jumper back onto pins 2-3.
10 Close the case by following the instructions in “Closing the server case”
on page 45.
11 Turn on the server. A message appears saying that the CMOS Date and Time
are not set.
12 Press F1 to reset the BIOS to factory default settings.
Resetting BIOS passwords
To reset BIOS passwords, you must reset and clear all BIOS settings. To reset
BIOS passwords, follow the instructions in “Resetting the BIOS” on page 90.
Configuration
jumper JP7
Pin 1
Pin 2
Pin 3