Gateway 960 Server User Manual


 
55
Installing drives
www.gateway.com
Installing a hard drive
Use this procedure to add or replace hard drives in the hot-swap bay. Your server
supports up to eight 1-inch high 3.5-inch SCA SCSI hard drives. You can
purchase additional SCSI drives through your Gateway sales representative.
To install a hard drive:
1 Unlock the front cover’s lock, then swing the hot-swap bay door open.
2 If a drive has failed, determine which drive has failed by running storage
console software. Match the software’s SCSI ID for the failed drive with
the SCSI ID number to the left of the hot-swap bays.
Important The numbers on the left side of the hot-swap bay identify
the SCSI ID of each drive. Install the topmost drives first.
Gateway tests and verifies the operation and compatibility
of the drives it sells. Additional or replacement drives must
conform to Gateway standards.
Hot-swap
bay