Filter
Top Products
73
Replacing the SCSI backplane
www.gateway.com
Replacing the SCSI backplane
Your server’s hot-swap cage can hold four SCSI drives. The cage is connected
to a SCSI backplane.
To replace the SCSI backplane:
1 Follow the instructions in “Preventing static electricity discharge” on
page 41.
2 Follow the instructions in “Opening the server case” on page 42.
3 Remove the fan nearest the SCSI backplane. For instructions, see
“Replacing a fan” on page 82.
4 Remove each of the drives from the hot-swap cage, noting the position of
each drive. For instructions, see “Installing a hard drive” on page 55.
5 Loosen the four captive thumbscrews on the front of the hot-swap cage.
Thumb-
screws
Thumb-
screws