Filter
Top Products
Wireless Cable Modem Gateway CGD24G User Manual
Wireless Configuration 2-15
v1.1, May 2009
How to Configure a Wireless Guest Network
To configure a wireless guest network:
1. Log in to the gateway using its default address of http://192.168.0.1 or at whatever IP address
the unit is currently configured. Use the default user name of admin and default password of
password, or the password you have set up.
2. In the main menu, under Setup, select Wireless Guest Network.The Wireless Guest Network
Settings screen displays
3. Under Guest LAN Settings, enter the following settings for the guest LAN:
• Current Guest Network. Select a guest network name (SSID) from the pulldown menu.
The default guest network names are Netgear_1, Netgear_2, and Netgear_3. To change the
name for a guest network, go to step 6.
• DHCP Server. From the pulldown menu, select whether or not the DHCP server is
enabled:
– Disabled. The DHCP server is disabled for the guest network.
– Enabled. The DHCP server is enabled for the guest network.
Figure 2-8