Filter
Top Products
Wireless Cable Modem Gateway CGD24G User Manual
Managing Your Network 4-7
v1.0, November 2008
To clear the log, click Clear Log; to refresh the log, click Refresh. You can enable e-mail
notification to receive these logs in an e-mail message. For information about e-mail
notifications, see “Configuring Logs” on page 3-1.
Running Diagnostic Utilities
You can use the Diagnostics screen to test connectivity to a PC using the ping command.
To start a ping test:
1. Log in to the gateway using its default address of http://192.168.0.1 or at whatever IP address
the unit is currently configured. Use the default user name of admin and default password of
password, or the password you have set up.
2. In the main menu, under Maintenance, select Diagnostics. The Diagnostics screen displays.
Figure 4-5