Filter
Top Products
Wireless Cable Modem Gateway CGD24G User Manual
A-2 Technical Specifications and Factory Default Settings
v1.1, May 2009
Factory Default Settings
You can use the reset button located on the rear panel of your Product Family to reset all settings to
their factory defaults. This is called a hard reset. To perform a hard reset, push and hold the reset
button for 5 seconds. The gateway reboots and returns to the settings shown in the following table.
Wireless
Radio data rates 1, 2, 5.5, 6, 9, 12, 18, 24, 36, 48, 54, and 108 Mbps
Auto Rate Sensing
Frequency 2.4-2.5 GHz
Operating frequency ranges 2.412~2.462 GHz (US)
2.412~2.472 GHz (Japan)
2.412~2.472 GHz (Europe ETSI)
Encryption 40-bit (also called 64-bit), 128-bit WEP data encryption,
WPA-PSK(TKIP), and WPA2-PSK(AES)
Table A-2. Default Configuration Settings
Feature Default Behavior
Gateway Login
User login URL http://192.168.1.1
User names and passwords (case
sensitive)
• mso/changme
• admin/password
Local Network (LAN)
LAN IP 192.168.0.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP starting IP address 192.168.0.10
DHCP Ending IP address 192.168.0.19
Firewall
Inbound communication from the Internet Disabled (except traffic on port 80, the http port)
Outbound communication to the Internet Enabled (all)
Source MAC filtering Disabled
Table A-1. Technical Specifications (continued)
Specification Description