Filter
Top Products
Wireless Cable Modem Gateway CGD24G User Manual
4-4 Managing Your Network
v1.0, November 2008
The gateway automatically goes through the following steps in the provisioning process:
1. It acquires and locks the downstream channel
2. It acquires the upstream parameters and range.
3. It locks the upstream channel
4. It acquires the IP address through DHCP
Changing the Built-In Password
For security reasons, the gateway has its own user name and password. Also, after a period of
inactivity for a set length of time, the administrator login will automatically disconnect. When
prompted, enter admin for the gateway user name and password for the gateway password. You
can use procedures below to change the gateway’s password.
NETGEAR recommends that you change this password to a more secure password. The ideal
password should contain no dictionary words from any language, and should be a mixture of both
upper and lower case letters, numbers, and symbols. Your password can be up to 30 characters.
To change the password:
1. Log in to the gateway using its default address of http://192.168.0.1 or at whatever IP address
the unit is currently configured. Use the default user name of admin and default password of
password, or the password you have set up.
2. In the main menu, under Maintenance, select Set Password. The Set Password screen
displays.
Note: The user name and password are not the same as any user name or password you
may use to log in to your Internet connection.
Figure 4-3