Filter
Top Products
Error messages
89
Not enough memory. Close all programs that are not currently in
use.
Print queue is full. Wait until the current print job has completed
before sending another print job.
If you receive this error often, you need to add
memory to the printer.
Printer is out of paper. Add paper to the printer.
Make sure the printer is online.
Required parameter
missing.
Make sure you entered the right command. If
you are trying to exit MS-DOS to return to
Windows, type exit and press
ENTER
.
Syntax error. Make sure you entered the right command.If
you are trying to exit MS-DOS to return to
Windows, type
exit
, then press E
NTER
.
Time and date not set. Enter the BIOS Setup utility to set the system’s
date and time.
Write protect error. Move the write-protection tab over the hole on
the back of the diskette.
Error Message Solutions