Filter
Top Products
www.gateway.com
35
6 Insert the diskette drive/adapter assembly into the left-hand hard drive bay, then secure it
with the thumbscrew that came with the kit.
7 Connect a USB cable from the USB floppy drive connector (J27) on the system board to the
back of the diskette drive.
8 Follow the instructions in “Closing the server case” on page 30.
9 Reinstall the bezel, if required, by snapping it into place on the front of the chassis.
10 Reconnect all power cords and peripheral device cables, then turn on the server.
Filling empty drive bays
Empty drive bays in the server must be filled by empty drive trays. With the bezel removed, install
the appropriate tray, then replace the bezel by snapping it into place on the front of the server.
Empty drive carriers for unused drive bays are included with your server.
Thumbscrew
Diskette drive/adapter
assembly (inserted)